Tinted Float Glass
0,00 €Float glass is the ordinary glass which is now widely used in our daily lives. Float glass is a kind of flat glass which is made by floating molten glass on a bed of molten metal, typically tin.
Tinted Float Glass
0,00 €Float glass is the ordinary glass which is now widely used in our daily lives. Float glass is a kind of flat glass which is made by floating molten glass on a bed of molten metal, typically tin.
Tinted Float Glass
0,00 €Float glass is the ordinary glass which is now widely used in our daily lives. Float glass is a kind of flat glass which is made by floating molten glass on a bed of molten metal, typically tin.
Toughenable Enamelled Glass
0,00 €Technical Information
| Processing Possibilities | Comments | |
| Safety | Toughened | Convection tempering furnace is highly recommended. The enamelled side must be facing upwards. |
| Laminated | Laminating via PVB, or EVA films | |
| Cutting | Rectangular or circular | Easily cuttable before tempering. |
| Shaping and edge finishing | Edge grinding | Edge grinding should be prosseced before tempering. – enamelled side always facing downwards. |
| Drilling | Edge grinding should be prosseced before tempering. – enamelled side always facing downwards. | |
| Notches | Always before tempering. | |
| Special treatments | Sand-blasting | Sand-blasting could be done on both sides before or after tempering. |
| Acid-frosting | Acid etching is available on both sides before or after tempering. (both soft etching & deep etching) | |
| Printing | Any printing is applicable. | |
| Bending | Enamelled side always facing away from the mold. | |
Toughenable Enamelled Glass
0,00 €Technical Information
| Processing Possibilities | Comments | |
| Safety | Toughened | Convection tempering furnace is highly recommended. The enamelled side must be facing upwards. |
| Laminated | Laminating via PVB, or EVA films | |
| Cutting | Rectangular or circular | Easily cuttable before tempering. |
| Shaping and edge finishing | Edge grinding | Edge grinding should be prosseced before tempering. – enamelled side always facing downwards. |
| Drilling | Edge grinding should be prosseced before tempering. – enamelled side always facing downwards. | |
| Notches | Always before tempering. | |
| Special treatments | Sand-blasting | Sand-blasting could be done on both sides before or after tempering. |
| Acid-frosting | Acid etching is available on both sides before or after tempering. (both soft etching & deep etching) | |
| Printing | Any printing is applicable. | |
| Bending | Enamelled side always facing away from the mold. | |
Toughenable Enamelled Glass
0,00 €Technical Information
| Processing Possibilities | Comments | |
| Safety | Toughened | Convection tempering furnace is highly recommended. The enamelled side must be facing upwards. |
| Laminated | Laminating via PVB, or EVA films | |
| Cutting | Rectangular or circular | Easily cuttable before tempering. |
| Shaping and edge finishing | Edge grinding | Edge grinding should be prosseced before tempering. – enamelled side always facing downwards. |
| Drilling | Edge grinding should be prosseced before tempering. – enamelled side always facing downwards. | |
| Notches | Always before tempering. | |
| Special treatments | Sand-blasting | Sand-blasting could be done on both sides before or after tempering. |
| Acid-frosting | Acid etching is available on both sides before or after tempering. (both soft etching & deep etching) | |
| Printing | Any printing is applicable. | |
| Bending | Enamelled side always facing away from the mold. | |
Toughened Glass
0,00 €PVB Interayer UV Transmittance percentage table
| %UV Transmittance | Laminate Specifications |
%18 | 0.38 mm |
%4.5 | 0.76 mm |
%1.25 | 1.14 mm |
%1 | 1.52 mm |
Proved UV raydiance is 380 nm | |
Toughened Glass
0,00 €PVB Interayer UV Transmittance percentage table
| %UV Transmittance | Laminate Specifications |
%18 | 0.38 mm |
%4.5 | 0.76 mm |
%1.25 | 1.14 mm |
%1 | 1.52 mm |
Proved UV raydiance is 380 nm | |
Toughened Glass
0,00 €PVB Interayer UV Transmittance percentage table
| %UV Transmittance | Laminate Specifications |
%18 | 0.38 mm |
%4.5 | 0.76 mm |
%1.25 | 1.14 mm |
%1 | 1.52 mm |
Proved UV raydiance is 380 nm | |
Unitised Facades Glass Facade
0,00 €Unitised panels typically include a structural framing system, sheathing, weatherproofing, insulation and exterior wall cladding. Today, most construction projects are subject to intense time pressure.
Unitised Facades Glass Facade
0,00 €Unitised panels typically include a structural framing system, sheathing, weatherproofing, insulation and exterior wall cladding. Today, most construction projects are subject to intense time pressure.
Unitised Facades Glass Facade
0,00 €Unitised panels typically include a structural framing system, sheathing, weatherproofing, insulation and exterior wall cladding. Today, most construction projects are subject to intense time pressure.