Showing 217–228 of 249 results

Solar Panel Structure-L

0,00 
    • Ardin Sanat Solar structure in three models 1800, 3000 and 45000W, are designed for high secure solar system.

Advantages:

  • Ground mounted type with 4-pillar base would be strong against up to 120km/h wind speed
  • Fully hot deep galvanize
  • Designed by structure software simulator SAP, AISC-89-asd
  • Scalable 1500W up to 4500W
  • Fully nut and bolt assemble
  • Easy installation

Solar Panel Structure-M

0,00 
    • Ardin Sanat Solar structure in three models 1800, 3000 and 45000W, are designed for high secure solar system.

Advantages:

  • Ground mounted type with 4-pillar base would be strong against up to 120km/h wind speed
  • Fully hot deep galvanize
  • Designed by structure software simulator SAP, AISC-89-as
  • Scalable 1500W up to 4500W
  • Fully nut and bolt assemble
  • Easy installation

Solar Panel Structure-Seasonal

0,00 

Ardin Sanat Roof type and Ground Mounting Solar Structure is especially design to achieve the maximum solar radiation and energy yield by means of adjustable solar panel angle.

Advantages:

  • Fully hot deep galvanized
  • Designed by structure software simulator SAP, AISC-89-ASD
  • Scalable 1500W up to 4500W
  • Fully nut and bolt assembly
  • Adjustable tilt angle manually
  • Easy mounting

Solar panels

0,00 

Solar cells are made in Micro-Electronic Feb depending to need of users are assembled together in complexes that are applicable in environment condition and related voltage and amperage which forms a solar panel.

Solid & Stranded Wire

0,00 
Model :NYA – NYFA (70°C)
Description :These Wires Are Used For General Purposes as Building, Lighting
Company name :MOGHAN CABLE Co
Packaging :
Minimum order :1
Standard :
Production power :

Special transformers

0,00 

Arya Transfo is ready to design and manufacture all types of special transformers used in industries in accordance with the special requirement of the customers

Split Phase Evaporative Cooler Electro Motors

0,00 

Product Specification

TypeFrame sizeOutput PowerOutput PowerRated VoltageSpeed in rated loadRated CurrentRated TorquePower factorStarting / Rated CurrentStarting / Rated TorqueBreak down / Rated TorqueInertia momentPoles
SP 56-4/6 56 0.187/0.062 1/4 / 1/12 220 1425/950 2.86/1.05 1.25/0.62 0.655/0.57 6.18 1.92 2.32/2.82 0.001883 1
SP 56-4/6 56 0.25/0.07 1/3 / 1/10 220 1425/950 3.2/2.1 1.67/0.75 0.69/0.531 5.6 1.62 2.15/2.69 0.002034 1
SP 56-4/6 56 0.37/0.124 1/2 / 1/6 220 1425/950 4.47/2.5 2.5/1.25 0.721/0.616 6.2 1.52 1.92/2.08 0.002488 1

Straight Connector

0,00 

The street connector is used for direct connection (axis to axis) of two micro ducts. This interface provides a fast, easy and secure connection that also has the ability to seal the micro document.

Sub Duct

0,00 

These pipes are fitted to install light cables into communication channels and are produced in 3 and 4 plies. They are black high-density polyethylene (HDPE) pipes and should be packed in the length of 255 m, dia. 120 cm, using winding m/cs in a fully circular form.

Teleco Mobile

0,00 

Telecom Equipped Vehicle

The Telecom Equipped Vehicle has been designed and manufactured by Paya Communication Industries with the goal of achieving the ability to quickly transport a Telecommunication facility base from one place to another in critical or catastrophic situations.

With its high transportability, and a very short restart and up time of under 3 minutes, this product has made its way through a vast set of applications, not only in cases of unexpected catastrophe such as earthquakes, but also in cases when a burst of high traffic service is demanded in a specific physical area.

The TelecoMobile basically consists of a shelter with two separate compartments, in one of which the outdoor equipment racks will racks will be installed, and the other accommodating a telescopic tower and power generator. The shelter may be installed on any type of truck and is equipped with four manual jacks on its sides.

The TelecoMobile´s outstanding features include high safety measures, not requiring a grade-1 driving license for driving it according to its lower weight, and the optimum amount of space occupied by the product.

Telecom Equipped Trailer

0,00 

Cell on Wheel

The Telecom Equipped Trailer has been designed and manufactured by Paya Communication Industries with the goal of achieving the ability to quickly transport a Telecommunications facility base from one place to another in critical or catastrophic situations.

This Mobile Communication Site is manufactured in form of a towable trailer consisting of four main parts; Balancing System, Chassis & Suspension System, Cabin set and Tower.

Telecom Mobile Shelter

0,00 

Cell on Leg

Portable telecom mobile shelter is composed of one outdoor Shelter with external dimensions of 2.2× 2.3 m with one main door for the equipment room and two roller doors for access to mast and other external component, 18 m telescopic mast equipped with folding feeder collector, Automatic diesel generator with the additional fuel tank, Air conditioning system and other required equipment’s, loaded and unloaded on the trailer easily by 8 internal hydraulic jacks without any need to crane.