Showing 1–12 of 31 results

2EDB-70 Jet Heater

0,00 

The Jet Heater Model 2EDB-70 is equipped with Chimney as well as capability of double engine. The unit run on gas and diesel fuel at the same time according to its application and equipped with thermal sensor and flow switch that prevent to temperature rise of 140 degree Celsius (Overheat safety shut-off) and ensure the unit safety. The heater providing the desired warmth and comfort for Greenhouses and industrial due to bring fresh air from outside and exhaust polluting gases through chimney. The existence of 100-liter fuel tank of the unit provides the user to use the operation as a portable. Thermal capacity is 70.000 kcal/h, the quantity of the air flow is 5000 m3 and provide heating space up to 700 – 2000 m3.

3 Blade Circulation Fans NTA363

0,00 

The Circulation Fan is designed to the movement of air and uniform temperature and humidity and its ideal for industrial halls, greenhouses, mushroom production halls, Poultry Farms, and Live Stocks. This fan is installed on the ceiling and high altitude below the roof of halls. The circular fan reduces the pressure loss by improving the performance of the main ventilation system and increasing the efficiency of cooling systems (coolers) and pro-fan and heating systems such as a fan heater and jet heater.

4 Blade Circulation Fans NTA447

0,00 

The Circulation Fan is designed to the movement of air and uniform temperature and humidity and its ideal for industrial halls, greenhouses, mushroom production halls, Poultry Farms, and Live Stocks. This fan is installed on the ceiling and high altitude below the roof of halls. The circular fan reduces the pressure loss by improving the performance of the main ventilation system and increasing the efficiency of cooling systems (coolers) and pro-fan and heating systems such as a fan heater and jet heater.

4 Blade Circulation Fans NTA457

0,00 

The Circulation Fan is designed to the movement of air and uniform temperature and humidity and its ideal for industrial halls, greenhouses, mushroom production halls, Poultry Farms, and Live Stocks. This fan is installed on the ceiling and high altitude below the roof of halls. The circular fan reduces the pressure loss by improving the performance of the main ventilation system and increasing the efficiency of cooling systems (coolers) and pro-fan and heating systems such as a fan heater and jet heater.

6 Blade Circulation Fans NTA657

0,00 

The Circulation Fan is designed to the movement of air and uniform temperature and humidity and its ideal for industrial halls, greenhouses, mushroom production halls, Poultry Farms, and Live Stocks. This fan is installed on the ceiling and high altitude below the roof of halls. The circular fan reduces the pressure loss by improving the performance of the main ventilation system and increasing the efficiency of cooling systems (coolers) and pro-fan and heating systems such as a fan heater and jet heater.

Air Inlet

0,00 

These types of ducts are located on the upper side of the wall to allow air to be combined with the air in the upper part of the hall. In cold weather, the cold air blends out of the inside with warm air, thus saving fuel and maintaining the desired temperature. The proper airflow is possible when the inlet valves are opened and closed properly.

Axial Evaporative Cooler SE310

0,00 
Power Supply220 – 240,50 v~Hz  110 – 120,60 v~Hz
Current(high mode)0.77 A 1.6 A
Energy class A A
Length650 mm  650 mm
Width650 mm  650 mm
Height 780 mm  780 mm
Net Weight 30 kg  30 kg
Gross Weight 31 kg 31 kg
Water Inlet 1/6 inch 1/6 inch
Electro static painting √ √
Metal TypeGalvanizedGalvanized
Cooling pad typeWood wool padWood wool pad
Capacity1630 cfm1630 cfm
Power of electro-pump 1/60 hp  1/60 hp
Power of electro-motor 1/10 hp  1/10 hp
Function typeAxial fanAxial fan
Water volume 33 lit  33 lit

Cold Plasma for Food Processing

0,00 

Introduction

Cold Plasma for Food Processing works based on a novel non-thermal food processing technology that uses energetic and reactive gases for mild surface decontamination of foods and packaging materials. In this system, dielectric barrier discharge (DBD) is used as a common method for generation of non-thermal plasma. DBD is electrical discharge between two electrodes which at least one of them is covered by an insulating dielectric barrier. Applying high voltage alternating current leads to the non-thermal DBD plasma generation at atmospheric pressure.

Evaporative Air Cooler Down-Draft

0,00 

The Evaporative Air Cooler model NTAC3/150D is the first evaporative air cooler produced in Iran. This unit with its unique design has wide use in both household and industrial applications. The polymer body and dramatic weight loss of the device make it resistant to atmospheric conditions and direct light exposure. Using the Higher-efficiency of cellulose evaporative cooling pads causes a high absorbent (water) so adequate cooling will be provided. Moreover, it isn’t necessary to replace the swamp cooler pad each year.
The existence of a drain pump in this unit provides the user to drain water automatically in areas with very hard water.

Evaporative Air Cooler Side-Draft

0,00 

The Evaporative Air Cooler model NTAC9/180F is the first evaporative air cooler produced in Iran. This unit with its unique design has wide use in both household and industrial applications. The polymer body and dramatic weight loss of the device make it resistant to atmospheric conditions and direct light exposure. Using the Higher-efficiency of cellulose evaporative cooling pads causes a high absorbent (water) so adequate cooling will be provided. Moreover, it isn’t necessary to replace the swamp cooler pad each year.

Evaporative Air Cooler Up-Draft

0,00 

The Evaporative Air Cooler model NTAC9/180U is the first evaporative air cooler produced in Iran. This unit with its unique design has wide use in both household and industrial applications. The polymer body and dramatic weight loss of the device make it resistant to atmospheric conditions and direct light exposure. Using the Higher-efficiency of cellulose evaporative cooling pads causes a high absorbent (water) so adequate cooling will be provided. Moreover, it isn’t necessary to replace the swamp cooler pad each year.
The existence of a drain pump in this unit provides the user to drain water automatically in areas with very hard water.

Evaporative Cooler SE280

0,00 

Power Supply

220 – 240,50 v~Hz  110 – 120,60 v~Hz
Current(high mode)0.9  A

 2.3  A

Current(low mode)

0.7  A 1.8  A
Energy class D

 D

Length

 500 mm  500 mm
Width 500 mm

  500 mm

Height

 500 mm  500 mm
Net Weight 21 kg

  21 kg

Gross Weight

 21 kg 21 kg
Water Inlet 1/4 inch

 1/4 inch

Electro static painting √ √

Metal Type

GalvanizedGalvanized
Cooling pad typeWood wool pad

Wood wool pad

Air outlet dim230 x 255230 x 255
Capacity 900 cfm

1080 cfm

Maximum power of blowing

 1530 m³/h

  1530 m³/h

Power of electro-pump

 1/60 hp  1/60 hp
Power of electro-motor 1/3 hp

  1/3 hp

Function type

Centrifugal

Centrifugal

Water volume

 22 lit

  22 lit