Cold Press Caliber 180 Production line
0,00 €The cold press oil extraction devices with power consumption 7. 5 kW 3-phase power works and life of at least five years has been set. Press 180 with high efficiency can catch the last of the oil lies in variety of oilseeds, the device is unrivaled in the world. For example, the device is capable of up to 42% of canola and sesame oil make up 52%.
The device is capable of drawing oil without causing environmental pollution and daily audio from 3 to 5 tons of grain to make oil and meal.
Cold Press Caliber 400 Production line
0,00 €It is suitable for factories. Input capacity for a variety of Oilseeds from 16 to 25 tons per 24 hours.
It is an oil, cold press machine made the world’s largest mobile operator with hydraulic jacks for easy operation and shock-resistant cyclo gearbox will be offered.
Cold Press Caliber 45 Production line
0,00 €The newest models made by the company that has the ability to use domestic phase. In order to satisfy customers’ requests to build the device between 35 and 65 mm models have been produced and is suitable for use in the shop, grocery and laboratories is. Actual input capacity is 240 kg of oilseed per day.
Cold Press Caliber 65 Production line
0,00 €Model 65mm & also other models can use for various type of seeds like sunflower , sesame , olive , coconut & etc.
Any way if you like to have small business or make your own family oil usage by yourself this can be best choice for you .
By this press you can produce 100% natural virgin vitamin edible oil in your factory , house , store , garage or any place you like.
Cold Press Caliber 85 Production line
0,00 €The newest models made by the company that has the ability to use domestic phase. In order to satisfy customers’ requests to build the device between 35 and 65 mm models have been produced and is suitable for use in the shop, grocery and laboratories is. Actual input capacity is 240 kg of oilseed per day.
Iran2africa Machine Sazi Tabriz CNC Centering Machines VMC1050
0,00 €| TECHNICAL SPECIFICATIONS OF VERTICAL MACHINES CENTRE VMC850 , VMC1050 , VMC1250 | |||||
| ITEM MODEL | UNIT | VMC 850 | VMC 1050 | VMC 1250 | |
| Table workinq surface | mm | 500 x 1000 | 500 x 1200 | 500 x 1220 | |
| Lonqitudinal travel (X) | mm | 800 | 1050 | 1143 | |
| Cross travel (Y) | mm | 500 | 530 | ||
| Vertical travel (Z) | mm | 610 | 640 | ||
| Soindle nose to table | mm | 100-710 | 150-790 | ||
| Soindle center to column | mm | 550 | |||
| Soindle taper | mm | BT40 | |||
| Soindle speed | rpm | 60-8000 | |||
| Soindle motor | Kw | 9/12 | 9/12 (Hi-Low qear box) | ||
| Guideway | Linear quide way | Box way | |||
| X-Y-Z Rapid traverse | m/min | 36/36/30 | 30/30/20 | ||
| Servo motor(X, Y, Z axes) (Mo) | Nm I rpm | 16 / 3000 | |||
| Coolant pump motor | 2.1HP (P:3.5kq/Cm2,Q100L/min) | ||||
| Tool chanqer & Tool Maqazine type | Umbrella I Pneumatic | ||||
| Cuttinq feed | mm/min | 1-8000 | |||
| No. of tools | 24 | ||||
| Adiacent oockets max. tool dia. | mm | 75 | |||
| Max. tool dia.(without Adiacent tools) | mm | 100 | |||
| Max. tool lenath | mm | 320 | |||
| Max. tool weiqht | Kq | 10 | |||
| Table load caoacitv | Ka | 600 | 800 | 1500 | |
| Machine weiqht | Kq | 5500 | 6000 | 7270 | |
| Floor soace | mm | 2350x 3200 | 2920x 3200 | 2800x 3300 | |
| mm | 030 | 040 | |||
| X-Y-Z Ball scre | w dia. | ||||
| Cutting Capacity For CK45 | Millina | mm | 120 cc/min | 180 cc/mm | |
| Drillina | mm | 030 | 040 | ||
| Taooina | M30 x P3.5 | ||||
| Power suoolv | 380V-50Hz-3oh | ||||
| Possible for 4th axis | Yes | ||||
Iran2africa Machine Sazi Tabriz CNC Centering Machines VMC1250
0,00 €| TECHNICAL SPECIFICATIONS OF VERTICAL MACHINES CENTRE VMC850 , VMC1050 , VMC1250 | |||||
| ITEM MODEL | UNIT | VMC 850 | VMC 1050 | VMC 1250 | |
| Table workinq surface | mm | 500 x 1000 | 500 x 1200 | 500 x 1220 | |
| Lonqitudinal travel (X) | mm | 800 | 1050 | 1143 | |
| Cross travel (Y) | mm | 500 | 530 | ||
| Vertical travel (Z) | mm | 610 | 640 | ||
| Soindle nose to table | mm | 100-710 | 150-790 | ||
| Soindle center to column | mm | 550 | |||
| Soindle taper | mm | BT40 | |||
| Soindle speed | rpm | 60-8000 | |||
| Soindle motor | Kw | 9/12 | 9/12 (Hi-Low qear box) | ||
| Guideway | Linear quide way | Box way | |||
| X-Y-Z Rapid traverse | m/min | 36/36/30 | 30/30/20 | ||
| Servo motor(X, Y, Z axes) (Mo) | Nm I rpm | 16 / 3000 | |||
| Coolant pump motor | 2.1HP (P:3.5kq/Cm2,Q100L/min) | ||||
| Tool chanqer & Tool Maqazine type | Umbrella I Pneumatic | ||||
| Cuttinq feed | mm/min | 1-8000 | |||
| No. of tools | 24 | ||||
| Adiacent oockets max. tool dia. | mm | 75 | |||
| Max. tool dia.(without Adiacent tools) | mm | 100 | |||
| Max. tool lenath | mm | 320 | |||
| Max. tool weiqht | Kq | 10 | |||
| Table load caoacitv | Ka | 600 | 800 | 1500 | |
| Machine weiqht | Kq | 5500 | 6000 | 7270 | |
| Floor soace | mm | 2350x 3200 | 2920x 3200 | 2800x 3300 | |
| mm | 030 | 040 | |||
| X-Y-Z Ball scre | w dia. | ||||
| Cutting Capacity For CK45 | Millina | mm | 120 cc/min | 180 cc/mm | |
| Drillina | mm | 030 | 040 | ||
| Taooina | M30 x P3.5 | ||||
| Power suoolv | 380V-50Hz-3oh | ||||
| Possible for 4th axis | Yes | ||||
Machine Sazi Tabriz CNC Centering Machines VMC1050
0,00 €| TECHNICAL SPECIFICATIONS OF VERTICAL MACHINES CENTRE VMC850 , VMC1050 , VMC1250 | |||||
| ITEM \ MODEL | UNIT | VMC 850 | VMC 1050 | VMC 1250 | |
| Table workinq surface | mm | 500 x 1000 | 500 x 1200 | 500 x 1220 | |
| Lonqitudinal travel (X) | mm | 800 | 1050 | 1143 | |
| Cross travel (Y) | mm | 500 | 530 | ||
| Vertical travel (Z) | mm | 610 | 640 | ||
| Soindle nose to table | mm | 100-710 | 150-790 | ||
| Soindle center to column | mm | 550 | |||
| Soindle taper | mm | BT40 | |||
| Soindle speed | rpm | 60-8000 | |||
| Soindle motor | Kw | 9/12 | 9/12 (Hi-Low qear box) | ||
| Guideway | Linear quide way | Box way | |||
| X-Y-Z Rapid traverse | m/min | 36/36/30 | 30/30/20 | ||
| Servo motor(X, Y, Z axes) (Mo) | Nm I rpm | 16 / 3000 | |||
| Coolant pump motor | 2.1HP (P:3.5kq/Cm2,Q100L/min) | ||||
| Tool chanqer & Tool Maqazine type | Umbrella I Pneumatic | ||||
| Cuttinq feed | mm/min | 1-8000 | |||
| No. of tools | 24 | ||||
| Adiacent oockets max. tool dia. | mm | 75 | |||
| Max. tool dia.(without Adiacent tools) | mm | 100 | |||
| Max. tool lenath | mm | 320 | |||
| Max. tool weiqht | Kq | 10 | |||
| Table load caoacitv | Ka | 600 | 800 | 1500 | |
| Machine weiqht | Kq | 5500 | 6000 | 7270 | |
| Floor soace | mm | 2350x 3200 | 2920x 3200 | 2800x 3300 | |
| mm | 030 | 040 | |||
| X-Y-Z Ball scre | w dia. | ||||
| Cutting Capacity For CK45 | Millina | mm | 120 cc/min | 180 cc/mm | |
| Drillina | mm | 030 | 040 | ||
| Taooina | M30 x P3.5 | ||||
| Power suoolv | 380V-50Hz-3oh | ||||
| Possible for 4th axis | Yes | ||||
Machine Sazi Tabriz CNC Centering Machines VMC1250
0,00 €| TECHNICAL SPECIFICATIONS OF VERTICAL MACHINES CENTRE VMC850 , VMC1050 , VMC1250 | |||||
| ITEM \ MODEL | UNIT | VMC 850 | VMC 1050 | VMC 1250 | |
| Table workinq surface | mm | 500 x 1000 | 500 x 1200 | 500 x 1220 | |
| Lonqitudinal travel (X) | mm | 800 | 1050 | 1143 | |
| Cross travel (Y) | mm | 500 | 530 | ||
| Vertical travel (Z) | mm | 610 | 640 | ||
| Soindle nose to table | mm | 100-710 | 150-790 | ||
| Soindle center to column | mm | 550 | |||
| Soindle taper | mm | BT40 | |||
| Soindle speed | rpm | 60-8000 | |||
| Soindle motor | Kw | 9/12 | 9/12 (Hi-Low qear box) | ||
| Guideway | Linear quide way | Box way | |||
| X-Y-Z Rapid traverse | m/min | 36/36/30 | 30/30/20 | ||
| Servo motor(X, Y, Z axes) (Mo) | Nm I rpm | 16 / 3000 | |||
| Coolant pump motor | 2.1HP (P:3.5kq/Cm2,Q100L/min) | ||||
| Tool chanqer & Tool Maqazine type | Umbrella I Pneumatic | ||||
| Cuttinq feed | mm/min | 1-8000 | |||
| No. of tools | 24 | ||||
| Adiacent oockets max. tool dia. | mm | 75 | |||
| Max. tool dia.(without Adiacent tools) | mm | 100 | |||
| Max. tool lenath | mm | 320 | |||
| Max. tool weiqht | Kq | 10 | |||
| Table load caoacitv | Ka | 600 | 800 | 1500 | |
| Machine weiqht | Kq | 5500 | 6000 | 7270 | |
| Floor soace | mm | 2350x 3200 | 2920x 3200 | 2800x 3300 | |
| mm | 030 | 040 | |||
| X-Y-Z Ball scre | w dia. | ||||
| Cutting Capacity For CK45 | Millina | mm | 120 cc/min | 180 cc/mm | |
| Drillina | mm | 030 | 040 | ||
| Taooina | M30 x P3.5 | ||||
| Power suoolv | 380V-50Hz-3oh | ||||
| Possible for 4th axis | Yes | ||||
Machine Sazi Tabriz CNC Centering Machines VMC850
0,00 €| TECHNICAL SPECIFICATIONS OF VERTICAL MACHINES CENTRE VMC850 , VMC1050 , VMC1250 | |||||
| ITEM \ MODEL | UNIT | VMC 850 | VMC 1050 | VMC 1250 | |
| Table workinq surface | mm | 500 x 1000 | 500 x 1200 | 500 x 1220 | |
| Lonqitudinal travel (X) | mm | 800 | 1050 | 1143 | |
| Cross travel (Y) | mm | 500 | 530 | ||
| Vertical travel (Z) | mm | 610 | 640 | ||
| Soindle nose to table | mm | 100-710 | 150-790 | ||
| Soindle center to column | mm | 550 | |||
| Soindle taper | mm | BT40 | |||
| Soindle speed | rpm | 60-8000 | |||
| Soindle motor | Kw | 9/12 | 9/12 (Hi-Low qear box) | ||
| Guideway | Linear quide way | Box way | |||
| X-Y-Z Rapid traverse | m/min | 36/36/30 | 30/30/20 | ||
| Servo motor(X, Y, Z axes) (Mo) | Nm I rpm | 16 / 3000 | |||
| Coolant pump motor | 2.1HP (P:3.5kq/Cm2,Q100L/min) | ||||
| Tool chanqer & Tool Maqazine type | Umbrella I Pneumatic | ||||
| Cuttinq feed | mm/min | 1-8000 | |||
| No. of tools | 24 | ||||
| Adiacent oockets max. tool dia. | mm | 75 | |||
| Max. tool dia.(without Adiacent tools) | mm | 100 | |||
| Max. tool lenath | mm | 320 | |||
| Max. tool weiqht | Kq | 10 | |||
| Table load caoacitv | Ka | 600 | 800 | 1500 | |
| Machine weiqht | Kq | 5500 | 6000 | 7270 | |
| Floor soace | mm | 2350x 3200 | 2920x 3200 | 2800x 3300 | |
| mm | 030 | 040 | |||
| X-Y-Z Ball scre | w dia. | ||||
| Cutting Capacity For CK45 | Millina | mm | 120 cc/min | 180 cc/mm | |
| Drillina | mm | 030 | 040 | ||
| Taooina | M30 x P3.5 | ||||
| Power suoolv | 380V-50Hz-3oh | ||||
| Possible for 4th axis | Yes | ||||
Machine Sazi Tabriz CNC Milling FU450R
0,00 €| Table working area | mm | 450 x 1600 |
| Table surface load | Kg | 1500 |
| Table rotation in both sides | Deg. | 45 |
| Table longitudinal travel (X) | mm | 1320 |
| Table cross travel (Y) | mm | 345 |
| Knee vertical travel (Z) | mm | 630 |
| Manual Head cross travel (W) | mm | 900 |
| spindle drive power | Kw | 11 |
| Tool taper | ISO | 50 |
| Speeds range | rpm | 28 — 1400 |
| Longitudinal and cross feeds | mm/min | 16 — 800 |
| Vertical feed rate | mm/min | 5 — 250 |
| Drive feed power | Kw | 2.2 |
| Rapid longitudinal and cross travel | mm/min | 3150 |
| Rapid vertical travel (Z) | mm/min | 1000 |
| Power capacity | Kw | 26 |
| Weight | Kg | 4920 |
Machine Sazi Tabriz CNC Turning Machines TC20HS
0,00 €| Swing over bed | mm | 420 |
| Swing over cross slide | mm | 240 |
| Distance between centers | mm | 520 |
| Chuck size | mm | 200 (8″) |
| Bed slant | 45° | |
| Spindle nose | A2-6 | |
| Spindle bore | mm | 66 |
| Bar capacity | mm | 51 |
| Spindle speed range | r.p.m | 29 — 4500 |
| Spindle motor | Kw (std) | 15 |
| Inner diameter of spindle bearing in front | mm | 100 |
| Type of turret Hydraulic | VDI | 30 |
| No. of tools | 12 | |
| Dimension of tool shank | mm | 20×20 |
| Cross travel (X-axis) | mm | 200 |
| Longitudinal travel (Z-axis) | mm | 400 |
| Rapid traverse | M/mm | X:24 2:30 |
| Tailstock traverse | mm | 350 |
| Tailstock quill traverse | mm | 60 |
| Tailstock quill diameter | mm | 60 |
| Tailstock quill taper | MT | #4 |
| Coolant pump motor | HP | 1.7 |
| Hydraulic pump motor | HP | 2 |
| SIEMENS SINUMERIK | 828D | |
| Spindle motor (SIMOTIC M) | Kw /Nm/ rpm | | 12/120 / 1000 |
| Servo motor & drive (X-axis) (SINAMIC $120) | N.M / rpm | 11 / 3000 |
| Servo motor &d rive (Z-axis) (SINAMIC S120) | | N.M/rpm | 11/3000 |
| Weight | Kgs | 4100 |
| Packing (L.W.H) | Cm | 364 185×200 |