Metals & Minerals Galvanized sheets
0,00 €Hot dip galvanizing has been used for over 150 years as a successful commercial method in the world for protecting steel sheets against corrosion. Galvanized products have long service life and high corrosion resistance.
Pellet
0,00 €Pellet is the final product of the pelletizing and is the raw material for processes of pig iron production in the blast furnace and production of sponge iron by the various reduction methods. To use pellet, its quality for transportation should be desired. In common terms, pellet means balls produced from iron ore and other additives that are first smooth and then are hardened and is used for reduction by the traditional method of producing iron in the blast furnace or by the different methods of direct reduction.
Pig Iron
0,00 €Blast furnace is same as blast furnace cast iron that should be changed in order to be transformed to other iron derivatives. Blast furnace cast iron usually has impurities that are again melted to be changed into other ingot or casting parts and is casted again after Refining and alloying operations.
Rebbar wire rod
0,00 €SAE 1006 and SAE 1008 wires are also classified as low carbon steels. The parameters related to the hot rolling process for this group of wires are different from the previous samples due to their different chemical analysis and microstructure. The chemical analysis as well as the mechanical properties of these wires according to ASTM standard are presented in the table below.
rebbr
0,00 €| row | size(mm) | length(m) | weight of each branch(12m) | the number of branch per bounch | analyze |
| 1 | 8 rebar size | 12m | 5 | 400 | A3 |
| 2 | 10 rebar size | 12m | 7.8 | 260 | A3 |
Round bar wire rod
0,00 €SAE 1006 and SAE 1008 wires are also classified as low carbon steels. The parameters related to the hot rolling process for this group of wires are different from the previous samples due to their different chemical analysis and microstructure. The chemical analysis as well as the mechanical properties of these wires according to ASTM standard are presented in the table below.
Soudronic Wire Copper Wire
0,00 €Technical Specification
- Single wire
- Annealed (or hard : according to the order)
- Tensile Strength 245∼285 MPa
- Elongation (A250) 22∼28%
- Resistivity (20°C) < 0.15328 Ωg/m2 (<0.017241 Ωmm2/m)
Stainless Steel U-Tubes Pipe
0,00 €Size Range: OD 19_35 mm, WT 1.6_3.5 mm, L Max 15000 mm
Operative Standard & Grade Standards:
Bending Standard: TEMA &API 660
Type of End‐Finish: Beveled Both Ends or Plain Ends
Coating: Passivation and oiled, Black paint or varnish
Tests and Reports: Tubes are tested according to the standard’s specifications.
Steel Ingot 3SP Steel Billet
0,00 €Steel Ingot 3SP Steel Billet
application:
Used in the construction industry, including manufacture of grider, angles and drainpipe.