BITUMEN 85/100 Penetration Grade
$0.00Bitumen Penetration Grade 85/100 which is produced during the process of oxidation of vacuum bottom in distillation tower and its penetration grade is between 85 & 100. This bitumen manufactured from fractional/vacuum distillation of crude oil. This grade of Bitumen is mainly used in road construction, water proofing, building construction industries and also in cutback bitumen production. This kind of bitumen is suitable to use in cold regions.
BITUMEN 85/100 Penetration Grade
$0.00Bitumen Penetration Grade 85/100 which is produced during the process of oxidation of vacuum bottom in distillation tower and its penetration grade is between 85 & 100. This bitumen manufactured from fractional/vacuum distillation of crude oil. This grade of Bitumen is mainly used in road construction, water proofing, building construction industries and also in cutback bitumen production. This kind of bitumen is suitable to use in cold regions.
BITUMEN 85/100 Penetration Grade
$0.00Bitumen Penetration Grade 85/100 which is produced during the process of oxidation of vacuum bottom in distillation tower and its penetration grade is between 85 & 100. This bitumen manufactured from fractional/vacuum distillation of crude oil. This grade of Bitumen is mainly used in road construction, water proofing, building construction industries and also in cutback bitumen production. This kind of bitumen is suitable to use in cold regions.
Bitumen CSS1
$0.00CSS-1 emulsion bitumen is a cationic emulsion. CSS-1 bitumen emulsion is usually made by passing a mixture of hot bitumen and water phase between a rotating disk, cone or wheel and a stator. Asphalt CSS1 emulsion is a cation retardant bitumen emulsion containing 57% black bitumen and is made exactly according to ASTM D 2397M-13 standard.
Bitumen CSS1
$0.00CSS-1 emulsion bitumen is a cationic emulsion. CSS-1 bitumen emulsion is usually made by passing a mixture of hot bitumen and water phase between a rotating disk, cone or wheel and a stator. Asphalt CSS1 emulsion is a cation retardant bitumen emulsion containing 57% black bitumen and is made exactly according to ASTM D 2397M-13 standard.
Bitumen CSS1
$0.00CSS-1 emulsion bitumen is a cationic emulsion. CSS-1 bitumen emulsion is usually made by passing a mixture of hot bitumen and water phase between a rotating disk, cone or wheel and a stator. Asphalt CSS1 emulsion is a cation retardant bitumen emulsion containing 57% black bitumen and is made exactly according to ASTM D 2397M-13 standard.
Bitumen Emulsion-Bitumen & Tar
$0.00Bitumen emulsions are basically an O/W – Oil on Water solution – A dispersion of bitumen particles on water phase, stabilized with the addition of surfactants – Surface active agents – or most commonly known as emulsifiers. They are primarily used for tack coats for use in between hot mix asphalt layers and prime coats for thin hot mix surfacing layers or a chip seal pavements, other cold mixed asphalt and maintenance binder .
Bitumen emulsions are divided into three categories:
* Anionic with negatively charged globules
* Cationic with positively charged globules
* Non-ionic with neutral globules.
Base on the time of setting after spraying, Bitumen emulsions classification as Quick Set (QS), Rapild set (RS), Medium set (MS) and Slow set(SS)
Bitumen Emulsion-Bitumen & Tar
$0.00Bitumen emulsions are basically an O/W – Oil on Water solution – A dispersion of bitumen particles on water phase, stabilized with the addition of surfactants – Surface active agents – or most commonly known as emulsifiers. They are primarily used for tack coats for use in between hot mix asphalt layers and prime coats for thin hot mix surfacing layers or a chip seal pavements, other cold mixed asphalt and maintenance binder .
Bitumen emulsions are divided into three categories:
* Anionic with negatively charged globules
* Cationic with positively charged globules
* Non-ionic with neutral globules.
Base on the time of setting after spraying, Bitumen emulsions classification as Quick Set (QS), Rapild set (RS), Medium set (MS) and Slow set(SS)
Bitumen Emulsion-Bitumen & Tar
$0.00Bitumen emulsions are basically an O/W – Oil on Water solution – A dispersion of bitumen particles on water phase, stabilized with the addition of surfactants – Surface active agents – or most commonly known as emulsifiers. They are primarily used for tack coats for use in between hot mix asphalt layers and prime coats for thin hot mix surfacing layers or a chip seal pavements, other cold mixed asphalt and maintenance binder .
Bitumen emulsions are divided into three categories:
* Anionic with negatively charged globules
* Cationic with positively charged globules
* Non-ionic with neutral globules.
Base on the time of setting after spraying, Bitumen emulsions classification as Quick Set (QS), Rapild set (RS), Medium set (MS) and Slow set(SS)