Type of bearing | Ball, Rolling element and plain bearings |
Casing partition | Axially split |
Drive frequency | 50 / 60 Hz |
Type of drive | Electric motor / Diesel Engine |
Drive voltage | Low Voltage, High voltage |
No. of impeller entries | Double entry |
Impeller material | Cast Iron Alloys, Steel Alloys, Bronze Alloys |
Type of installation | Long-coupled |
Type of coupling | Direct |
Type of lubrication | Grease / Oil lubrication |
Max. permissible fluid temperature | 105 °C |
Nozzle position | In-line |
Maximum rated pressure (discharge) | PN 10, PN 16, PN 25 |
Pump set location | Dry installed |
Shaft material | Carbone Steel, Stainless Steel |
Suction characteristics | Non-priming |
Suitable for drinking water | Yes |
Type of casing | Volute casing |
Type of Impeller | Closed, Radial |
Type of connection | Flange |
Casing material | Cast Iron, Ductile Cast Iron, Carbon Steel |
Maximum Head | 200 m |
Minimum Head | 7 m |
Installation position | Horizontal or Vertical |
Shaft seal type | Gland packing, Mechanical seal |
Main applications | Industry and process Engineering, Building services, Water supply, Energy |
Maximum discharge-side pressure | 25 bar |
Maximum drive rating | 350 kW (and more on request) |
Type of installation | |
TMaximum flow rate | 3600 m³/h (and more on request) |
Minimum flow rate | 90 m³/h |
Maximum speed of rotation | 3500 1/min |
Usages:
- Pumping untreated and clean water, service water and seawater in waterworks
- Irrigation and drainage pumping stations
- Fire fighting Systems
- Shipbuilding
Reviews
There are no reviews yet.